Features

Scenario#41 – UCCX CAD Agent Issue in Call routing

Customer reported a problem about their UCCX version 8.5.1.11001-35 for CAD Agents. This is what they say about the problem: We have a UCCX Agent with a 9951 Cisco Phone with 2 Lines. First line is the private Line Second Line is the agent Line. Agent is logged into CAD with his agent extension. ContactContinue reading “Scenario#41 – UCCX CAD Agent Issue in Call routing”

Scenario#40 – Access Personal Directory/FastDial without PIN

You may have come across this that though you are logged into your profile through Extension mobility but when you try to access your “Personal Directory” you will be prompted for a userid and pin. Unfortunately, this is by design and cannot be changed. There is a workaround to escape entering userid and pin whichContinue reading “Scenario#40 – Access Personal Directory/FastDial without PIN”

Logging Missed Calls Shared line

With the missed call logging for shared lines feature, the administrator can configure Cisco Unified Communications Manager Administration, or the phone user can configure Cisco Unified CM User Options, so Cisco Unified Communications Manager logs missed calls in the call history to a specified shared line appearance on a phone. This will only work ifContinue reading “Logging Missed Calls Shared line”

Scenario#32 – SIP Calls drop after 75 minutes

I had an interesting case where SIP calls over a SIP trunk were dropping after like 75 minutes. The duration was not confirmed as sometimes it use to drop even before 75 minutes. I looked into few CCSIP debugs (debug ccsip messages) and found that the ‘BYE’ message was actually coming from our end (CallContinue reading “Scenario#32 – SIP Calls drop after 75 minutes”

How to Configure “Extension Mobility”

I had a request to do a quick write up on how to configure extension mobility properly. These are the steps involved (considering Call manager Linux versions): 1 – Configure extension mobility service by going into Device > Device settings > Phone Services The service URL is : http://call-manager-IP:8080/emapp/EMAppServlet?device=#DEVICENAME# If you want to set itContinue reading “How to Configure “Extension Mobility””

Scenario#29 – Interworking error -0x80FF

I came across this issue with one of our customer last week where a call was coming in to receptionist at Site ‘A’ but she was not able to transfer the call to someone at Site ‘B’. They had Centralized deployment and all phones on branch sites were registered to Central site. The call wasContinue reading “Scenario#29 – Interworking error -0x80FF”

CCMUser Access

The users which are part of a global directory can setup their own personal directory, speed dials etc by access CCMuser webpage. The link for any Call manager would be: https://x.x.x.x/ccmuser x.x.x.x = CUCM Pub The username and password will be same as mentioned under User Management > End user. You can restrict users toContinue reading “CCMUser Access”

IP Phone Background Image

Background Image on Gen 2 and Gen 3 Cisco IP phones can be changed by using the following procedure. I will be showing you how to do for a Cisco 7965 IP phone but the same procedure can be used for other IP phones (like 7941. 7961, 7945 etc). The only difference between different familyContinue reading “IP Phone Background Image”