Changing MOH file for CME router

If there is already a MOH file running at the CME router, follow the below steps to change it to a new one.

Sh flash:

55        7200 Dec 09 2008 10:53:52 Pulse1.raw
56        4000 Dec 09 2008 10:53:54 Ring1.raw
57        4000 Dec 09 2008 10:53:54 Ring2.raw
58        4000 Dec 09 2008 10:53:54 Ring3.raw
59        4000 Dec 09 2008 10:53:54 Ring4.raw
60        4000 Dec 09 2008 10:53:56 Ring5.raw
61        4000 Dec 09 2008 10:53:56 Ring6.raw
62        4000 Dec 09 2008 10:53:56 Ring7.raw
63         495 Dec 09 2008 10:53:56 RingList.xml
64       10800 Dec 09 2008 10:53:58 Sax1.raw
65       14160 Dec 09 2008 10:53:58 Sax2.raw
66       16080 Dec 09 2008 10:53:58 Vibe.raw
67           0 Jan 05 2009 13:28:42 configs
68       21903 Jan 05 2009 13:29:24 configs/config-050109-upgrade
69     1209168 May 19 2010 15:34:26 MOH2010.wav
70     1219613 Jun 08 2010 14:45:44 Delawarenew.wav

telephony-service
sdspfarm units 4
sdspfarm tag 1 CFP001e7a78c7d0
conference hardware
no auto-reg-ephone
load 7936 cmterm_7936.3-3-15-0
load 7941 SCCP41.8-3-3S
load 7961 SCCP41.8-3-3S
max-ephones 42
max-dn 144
ip source-address 10.95.254.3 port 2000
timeouts interdigit 5
network-locale GB
time-zone 21
date-format dd-mm-yy
voicemail 35090
max-conferences 8 gain -6
call-forward pattern .T
call-forward system redirecting-expanded
moh flash:Delawarenew.wav
multicast moh 239.0.2.1 port 2000 route 10.95.254.3

dn-webedit
time-webedit
transfer-system full-consult
transfer-pattern 9.T
secondary-dialtone 9

Upload the file:

1.       Copy the music file onto the flash of the router by using

command to run at the router # copy tftp://x.x.x.x/new_file.wav flash:

2.       Enable

3.       Conf terminal

4.       telephony-service

5.       no moh flash:Delawarenew.wav

6.       moh MOHJuly2010.wav

7.       multicast moh 239.1.1.1 port 2000

8.       create cnf-files

9.       exit

Verify:

UK-CME#sh ephone summ

hairpin_block:
ephone-1[0] Mac:001E.138C.D8D8 TCP socket:[9] activeLine:0 REGISTERED
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 debug:0  primary_dn: 20*
IP:10.95.254.116 7961  keepalive 63119  1:20 2:1 3:3
sp1:35089 sp2:907789690073#

ephone-2[1] Mac:0021.A087.2538 TCP socket:[20] activeLine:0 REGISTERED
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 debug:0  primary_dn: 134*
IP:10.95.254.125 7941  keepalive 176020  1:134

ephone-3[2] Mac:001D.A266.CD0B TCP socket:[4] activeLine:0 REGISTERED
mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 debug:0  primary_dn: 3*
IP:10.95.254.111 7961  keepalive 170599  1:3 2:18
sp1:35076 sp2:35066 sp3:35068 sp4:35065

.

.

.

.

.

Max Conferences 8 with 0 active (8 allowed)
Skinny Music On Hold Status
Active MOH clients 0 (max 210), Media Clients 0, B-ACD Clients 0
File flash:MOHJuly2010.wav type WAVE Media_Payload_G711Ulaw64k  160 bytes
Moh multicast on 239.0.2.1 port 2000 via 10.95.254.3

Advertisement

One thought on “Changing MOH file for CME router

  1. how to transfer a call to 001 if anyone press 0 for transfer to reception…and main point is reception having 001 to 005 six lines of numbers…

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: